Description
Digging Buckets for Diggers from 4 tonnes to 5.9 tonnes. Heavy duty digging buckets for the micro and mini excavator range. Buckets are made to order and will fit perfectly once correct dimensions have been provided. On ordering you shall be asked for the dimensions of your machine or hitch. Our fitting guide can assist you in taking measurements.
- All our Mini buckets range are made using 450 hb hardened blades. The blades will last a MINIMUM of 30% longer.
- The roll plate used is Strenex 700mc. Our buckets will therefore last 50% longer.
- A weld on teeth system is used on our buckets, allowing for ease of replacement. Ensuring less down time and lower maintenance cost for the customer in changing tips. Bucket teeth can also be purchased through our website for ease of replacement.
- Our buckets have more breakout force due to the teeth as opposed to the bolt on type used by competitors.
- Straps are horizontal across the bucket enforcing strength.
Please refer to the Excavator Fitting Guide if you are unsure of the make/model of your machine or how to check the measurements required. Note this is for reference only and may change depending on actual machine.
